Panasonic AJPCD20P AJPCD20P User Guide - Page 13
IEEE1394b Driver for Windows, 1) Before installation, 2) Installation of the IEEE1394b driver - ajpcd20 p2
![]() |
View all Panasonic AJPCD20P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ENGLISH IEEE1394b Driver for Windows This driver is for the IEEE1394b interface for the P2 card on this unit. 1) Before installation System requirements for the IEEE1394b driver are as follows. z OS: Windows XP Professional SP2 or higher z RAM: 512 MB or more (1 GB or more is recommended) z CPU: Pentium®4 1.5 GHz or higher is recommended The IEEE1394b connection in Windows 2000 is not supported. Before installing the IEEE1394b driver, install the update program provided by Microsoft in accordance with the following procedures. If the updates are not installed, a sufficient transfer rate may not be obtained. 1 Open the Web browser and navigate to the Microsoft website. 2 Enter "KB885222" in the search column on the website, and then press the search button. 3 Click the link for "Performance of 1394 devices may decrease after you install Windows XP Service Pack 2," which is indicated as a search result. 4 Read the information on the displayed page, then download and install the update program on the personal computer. 2) Installation of the IEEE1394b driver Install the IEEE1394b driver in accordance with the following procedures. The IEEE1394b driver is installed for each unit connected to a personal computer. If you use more than one unit on a single personal computer, install the drivers for the respective units separately. If the IEEE1394b driver are not installed, a sufficient transfer rate may not be obtained. 1 In accordance with the descriptions in "4. New Installation of the P2 Software" (from pages 4 to 6 of the installation manual), install the software up to Procedure No. 8. 2 When the window shown in Fig. 7 of Procedure No. 8 (page 6 in the installation manual) is displayed, select "AJ-PCD20 (P2 drive) 1394 driver" and then click OK. 3 When the message "Please connect AJ- PCD20 (P2 drive) by 1394" is displayed, connect this unit to the personal computer using IEEE1394b. Confirm that all five drive letters of this unit are displayed and then press Install. When the unit is connected to a personal computer through USB, remove the USB cable and then connect using IEEE1394b. 4 The warning box may be displayed; in such a case, click "Continue Anyway". The warning box may be displayed two or more times. 5 In accordance with the instructions on the screen, complete the installation and restart the personal computer. E-12
![](/manual_guide/products/panasonic-ajpcd20p-ajpcd20p-user-guide-ee8828e/13.png)