Panasonic AWE655 AWE350 User Guide - Page 45
Shutter Mode: Step, ELC, S/Scan], Electronic Shutter Step/Synchro Scan Setting
View all Panasonic AWE655 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
5. Electronic Shutter Mode Setting [Shutter Mode: Step, ELC, S/Scan] Step: Electronic shutter operates at the speed selected by the Electronic Shutter Step/Synchro Scan Setting (6-6). ELC: Electronic shutter is controlled to automatically adjust the luminance. S/Scan (Synchro Scan): Electronic shutter operates at the speed selected in Electronic Shutter Step/Synchro Scan Setting (6-6). Note If Frame 1 is selected in CCD Read Out Mode Setting (;-9), Electronic Shutter Mode Setting cannot be added. 6. Electronic Shutter Step/Synchro Scan Setting [Step/Synchro: OFF, 1/100 to 1/10 000 (step), 60.34Hz to 15.75kHz (Synchro Scan)] This can be set when "Step" or "Synchro Scan" has been selected as the electronic shutter mode setting (6-5). • When "Step" has been selected as the electronic shutter mode setting (6-5): OFF: The electronic shutter is set to OFF. 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, 1/10 000: The electronic shutter operates at the shutter speed selected. • When "Synchro Scan" has been selected as the electronic shutter mode setting (6-5): -45- When the screen of a work station, etc. is to be shot, the noise on the horizontal bars can be reduced by proceeding with the synchro-scan adjustment. ❈ Refer to the table below for the light quantity settings to be used in each shutter mode and during synchro scanning. Shutter Speed OFF 1/100 1/250 1/500 1/1 000 1/2 000 1/4 000 1/10 000 Synchro-scan Required luminance ratio - 1 100.3 Hz 2 250.0 Hz 4 492.2 Hz 8 984.4 Hz 16 1.969 kHz 32 3.938 kHz 64 7.875 kHz 160 Notes • In case of using the RCU (RCB), none of the shutter speeds - 1/250, 1/2 000, 1/4 000, and 1/10 000 can be selected. • In case of using the hybrid control panel, only OFF, 1/100, or ELC can be selected. • If the lens iris switch is at M (Manual) when operating the camera alone or when the iris switch on the RCU (RCB) is at AUTO, ELC may not function. Set the lens iris switch to A (Auto). • Flickering may increase at ELC under fluorescent lights.