Panasonic AWE655 AWE350 User Guide - Page 49

G/L Adjustment Set Display, Detail Set Display, Detail Level Setting [Detail: OFF, Low, High]

Get Panasonic AWE655 - COLOR CAMERA PDF manuals and user guides View all Panasonic AWE655 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

6. Negative/Positive Selection [Nega/Posi: Posi, Nega] Posi: Normal image Nega: Image is shown reversed in darkness and color. 8 G/L Adjustment Set Display 1. Horizontal Phase Adjustment [H Phase: -206 to +49] Horizontal phase can be adjusted when a genlock signal is supplied. 2. Subcarrier Phase Coarse Adjustment [SC Coarse: 1, 2, 3, 4] Coarse adjustment of subcarrier phase can be made when a genlock signal is supplied. 3. Subcarrier Phase Fine Adjustment [SC Fine: -511 to +511] Fine adjustment of subcarrier phase can be made when a genlock signal is supplied. 4. Color Bar Setup Setting [Color Bar Set: 0.0 IRE, 7.5 IRE] The setup level of color bar can be adjusted. 9 Detail Set Display 1. Detail Level Setting [Detail: OFF, Low, High] Contour correction quantity can be selected. Detail settings made using the Horizontal/Vertical Detail Level HIGH/LOW Setting. 2. Horizontal Detail Level HIGH Setting [H Detail Level H: L+1 to +63] 3. Vertical Detail Level HIGH Setting [V Detail Level H: L+1 to +31] 4. Horizontal Detail Level LOW Setting [H Detail Level L: 0 to H-1] 5. Vertical Detail Level LOW Setting [V Detail Level L: 0 to H-1] Detail level can be set in horizontal (H) and vertical (V) directions with the Detail Level Setting (9-1) at HIGH or LOW. Whichever the direction, H or V, the set level at HIGH must be at least one position higher than that at LOW. 6. Detail Band Setting [Detail Band: 1 to 5] A contour correction band can be set with the Detail Level Setting (9-1) at HIGH or LOW. The higher setting, the finer will be the detail. -49-

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
-49-
6. Negative/Positive Selection
[Nega/Posi: Posi, Nega]
Posi:
Normal image
Nega:
Image is shown reversed in darkness and
color.
8
G/L Adjustment Set Display
1. Horizontal Phase Adjustment
[H Phase: –206 to +49]
Horizontal phase can be adjusted when a genlock
signal is supplied.
2. Subcarrier Phase Coarse Adjustment
[SC Coarse: 1, 2, 3, 4]
Coarse adjustment of subcarrier phase can be made
when a genlock signal is supplied.
3. Subcarrier Phase Fine Adjustment
[SC Fine: –511 to +511]
Fine adjustment of subcarrier phase can be made
when a genlock signal is supplied.
4. Color Bar Setup Setting
[Color Bar Set: 0.0 IRE, 7.5 IRE]
The setup level of color bar can be adjusted.
9
Detail Set Display
1. Detail Level Setting [Detail: OFF, Low, High]
Contour correction quantity can be selected.
Detail settings made using the Horizontal/Vertical
Detail Level HIGH/LOW Setting.
2. Horizontal Detail Level HIGH Setting
[H Detail Level H: L+1 to +63]
3. Vertical Detail Level HIGH Setting
[V Detail Level H: L+1 to +31]
4. Horizontal Detail Level LOW Setting
[H Detail Level L: 0 to H–1]
5. Vertical Detail Level LOW Setting
[V Detail Level L: 0 to H–1]
Detail level can be set in horizontal (H) and vertical
(V) directions with the Detail Level Setting (
9
-
1
) at
HIGH or LOW.
Whichever the direction, H or V, the set level at HIGH
must be at least one position higher than that at
LOW.
6. Detail Band Setting [Detail Band: 1 to 5]
A contour correction band can be set with the Detail
Level Setting (
9
-
1
) at HIGH or LOW. The higher set-
ting, the finer will be the detail.