Panasonic AWE655 AWE350 User Guide - Page 53
Component: RGB, Y/Pr/Pb, Y/C], Digital Extender Setting [Digital Extender: OFF, ON]
View all Panasonic AWE655 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
11. Component Output Setting [Component: RGB, Y/Pr/Pb, Y/C] This enables RGB, Y/Pr/Pb or Y/C to be selected as the component signals which are to be output from the I/F REMOTE connector. 12. Digital Extender Setting [Digital Extender: OFF, ON] OFF: Under normal circumstances, this setting is used. ON: An extender effect which is approximately 1.5 times greater is achieved. However, the resolution drops when the digital extender is set to "ON". 13. Fan Setting [Fan: OFF, Auto] (models AW-E750, AW-E655) OFF: Select this setting to stop the fan when its operating sound is found to be bothersome in a studio or other such environment. Auto: The temperature is detected automatically, and the fan starts operating when the temperature exceeds approx. 10°C in the storage mode or approx. 35°C in any other mode. Under normal circumstances, the "Auto" setting is used. 14. Auto Focus Setting [Auto Focus: OFF, ON] (model AW-E655) This enables auto focus ON and OFF to be controlled when the zoom/focus cable of a Canon AF lens has been connected to the ZOOM/FOCUS connector on the AW-E655. 15. Filter Setting [Filter: IR Through, Normal, 1/16ND, 1/64ND] IR Through: The infrared shooting mode is established. Irradiate the subject with infrared light. Normal: Under normal circumstances, this setting is used. 1/16ND: The 1/16 ND filter is inserted. Use this setting when the lens cannot be stopped down enough by the diaphragm. 1/64ND: The 1/64 ND filter is inserted. Use this setting when the lens cannot be stopped down enough by the diaphragm even at the 1/16ND setting. -53-