Panasonic AWE655 AWE350 User Guide - Page 48

7 Color Set Display 1. Chroma Level Adjustment [Chroma Level: -3 to +3] Chroma Level can be decreased or increased to three levels. 2. White Balance Setting [White Bal: ATW, AWC A, AWC B, P SET 3 200K, P SET 5 600K] ATW: The white balance is automatically adjusted to the optimum position. AWC A, AWC B: Color temperature conditions at two points can be stored at AWC A and AWC B. Once the white balance is adjusted with the ITEM/AWC switch on the back of the camera, it is no longer necessary to set the white balance again if you simply select AWC A or AWC B, provided that the camera is used under the same conditions. Fine color adjustment can be made after setting AWC by red/blue gain adjustment in Painting Setting or from the RCU (RCB). P SET 3 200K: The white balance is adjusted to 3 200K illumination. P SET 5 600K: The white balance is adjusted to 5 600K illumination. Note Neither P SET 3 200K nor P SET 5 600K can be set from the RCU (RCB) or the hybrid control panel. 3. ATW Speed Setting [ATW Speed: SLOW 2, SLOW 1, MID, FAST 1, FAST 2] ATW Speed can be set. 4. Black Level Setting [Pedestal: -150 to +150] The black level (pedestal) of the luminance (Y) signal can be set. Used in adjusting the black levels of two or more cameras. 5. Painting Setting [Painting: R Gain, B Gain, R Pedestal, B Pedestal: -150 to +150] R Gain, B Gain: Fine adjustment of the white balance can be made after AWC setting when AWC A or AWC B is selected in White Balance Setting. In case of using the RCU (RCB), use the R/B gain controls for this purpose. The set value returns to ±0 after AWC setting in using the camera alone. R Pedestal, B Pedestal: Fine adjustment of the black balance can be made after ABC setting. In case of using the RCU (RCB), use the R/B pedestal controls for this purpose. The set value returns to ±0 after ABC setting in using the camera alone. R/B Gain Control R/B Pedestal Control -48- RCU (RCB)