Panasonic BL-MS103PK User Guide - Page 146

15 Error Messages Error Message Sequential Display mode is active. Set mode switch on back of unit to [NORMAL], then turn unit off/on. Causes and Solutions This error is displayed when the remote control is used during Automatic Display Mode. • Set the mode switch on the back of the device to Normal and turn the power on again. SD Memory Card Error Messages Error Message SD Memory Card is locked. Unlock the SD Memory Card and try again. No SD Memory Card. Insert card and try again. SD Memory Card is full. Cannot use this SD Memory Card. Could not format. Causes and Solutions This error is displayed when an SD memory card's write-protection is on. • Turn the write-protection off. This error appears if an SD memory card has not been inserted. • Insert an SD memory card. This error is displayed if there is no free space on the SD memory card. • Insert a blank SD memory card, or erase unneeded data from it. This error appears when an SD memory card not recognized by the BL-WV10A is used. • Use a recognizable SD memory card or format it using the BL-WV10A (see page 120). This error appeals when memory card formatting fails. • Re-format the card. If that fails to correct the problem, use a different SD memory card. [For assistance, please call: 1-800-272-7033] 145