Panasonic BL-MS103PK User Guide - Page 201
switch to [NORMAL], disconnect the DC cord from the rear of the unit
View all Panasonic BL-MS103PK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
3. Connect the camera to the power outlet. 4. Wait while the Quick Setup utility restarts the camera, then configures and registers the camera. • When the camera has been configured and registered, "Finished" is displayed next to the camera name ("CAM1") and the buzzer sounds. 5. To register another camera, connect the camera to one of the LAN jacks of the BL-WV10A or the BB-HGW700A, then turn the camera on by connecting it to the power outlet. 6. When you have finished registering all cameras, set the BL-WV10A's mode switch to [NORMAL], disconnect the DC cord from the rear of the unit, reconnect the DC cord, then continue from "Viewing Camera Images" on page 17. If images can be viewed from all cameras, disconnect devices as necessary and place them where you plan to use them. 16