Panasonic CQ C1305U Auto Radio/cd Deck-mult-lang - Page 12

General [SOURCE] (Source) selects a source. [PWR] (Power) toggles power on/off. [VOL] (Volume) [SQ] (Sound Quality) selects a sound type (SQ). [MUTE] toggles mute on/off. Remote Control Sensor Caution • Set the volume level to low enough before the AUX connection is completed. Failure to observe this, the loud noise may come out and damage your speakers and your hearing. *[AUX] (AUX IN) (3.5 mm  stereo) From line output of external sound/audio device (ex. Silicon-audio player, HDD player, etc.) *AUX IN: Power On/Off Set your car's ignition switch to the ACC or ON position. Power on: Press [SOURCE] (PWR). Power off: Hold down [SOURCE] (PWR) for more than 1 second. Source Selection Press [SOURCE] to change the source. * Radio Disc Player AUX IN SQ (Sound Quality) SQ is a function that can call up various sound types at the touch of button in accordance with your listening music type. Press [SQ] to select the sound type (SQ) as follows: (FLAT) flat frequency response: does not emphasize any part. (Default) (ROCK) speedy and heavy sound: exaggerates bass and treble. General Operations Volume Adjustment (Setting Range: 0 to 40, Default: 18) Turn [VOL]. (POP) wide-ranged and deep sound: slightly emphasizes bass and treble. Mute ON: Press [MUTE]. ( lights.) OFF: Press [MUTE] again. (VOCAL) clear sound: emphasizes middle tone and slightly emphasizes treble. Notes: • If no operation takes place for more than 5 seconds in the SQ selection mode, the display returns to the regular mode. • Settings of SQ, bass and treble are influenced one another. If such an influence causes distortion to the audio signal, readjust bass/treble or volume. • For further information on Bass, Treble, Balance and Fader settings, refer to Audio Settings.