Panasonic CQ C1305U Auto Radio/cd Deck-mult-lang - Page 19

Specifications General Power supply Current consumption Maximum power output Tone adjustment range Speaker impedance Pre-amp output voltage Pre-amp output impedance Dimensions (W x H x D) Weight Front AUX input Input impedance Allowable external input Connector Disc Player Sampling frequency DA converter Pick-up type Light source Wave length Frequency response Signal to noise ratio Total harmonic distortion Wow and flutter Channel separation : DC 12 V (11 V - 16 V DC), test voltage 14.4 V, negative ground : Less than 2.1 A (CD mode; 0.5 W x 4 channels) : 50 W x 4 channels (at 1 kHz), volume control maximum : Bass: ±12 dB at 100 Hz, Treble: ±12 dB at 10 kHz : 4 - 8  : 2.5 V (CD mode, 1 kHz, 0 dB) : 200  : 178 x 50 x 160 mm {7 x 1 15/16 x 6 2/16} : 1.3 kg {2 lbs. 14 oz} : 10 k : 2.0 V : 3.5 mm  Stereo mini-pin : 8 times oversampling : 1 bit DAC System : Astigma 3-beam : Semiconductor laser : 790 nm : 20 Hz - 20 kHz (±1 dB) : 96 dB : 0.01 % (1 kHz) : Below measurable limits : 75 dB FM Stereo Radio Frequency range Usable sensitivity 50 dB quieting sensitivity Frequency response Alternate channel selectivity Stereo separation Image rejection ratio IF rejection ratio Signal/noise ratio : 87.9 MHz - 107.9 MHz : 10.2 dBf. (0.9 µV, 75 ) : 15.2 dBf. (1.6 µV, 75 ) : 30 Hz - 15 kHz (±3 dB) : 75 dB : 35 dB (1 kHz) : 55 dB : 100 dB : 62 dB AM Radio Frequency range Usable sensitivity : 530 kHz - 1 710 kHz : 27 dB/µV (22 µV, S/N 20 dB) Above specifications comply with EIA standards. Power Output: 18 W RMS x 4 Channels at 4  and Signal to Noise Ratio: 85 dBA (reference: 1 W into 4 ) 1% THD+N Notes: • Specifications and design are subject to modification without notice due to improvements. • Some figures and illustrations in this manual may be different from your product.