Panasonic CQ-VX2200 Operating Instructions - Page 29

E N G L ❏ Precautions I S H ¡We strongly recommend that you wear gloves for installation work to protect yourself from injuries. ¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your 216 hands and fingers. Transportation bracket removal Be sure to remove the bracket for transportation before use (installation). CUse screws (5 mm φ x 8 mm) with washers for installation. Be careful not to lose any of these parts. Screw with washer (5 mmφ × 8 mm) x 4 Transportation Bracket x 2 CQ-VX2200W Note: ¡The screw holes on the right side are not tapped. Please only use screws provided to mount the unit. ¡To tighten the screws, press its head down straight forward. ❏ Typical Installation (For vehicle with double-DIN size) 1. Remove Car radio or little object box from the vehicle and the stopping brackets. 2. Use the appended screws q or w to install the brackets on this unit. 3. Install this unit into the vehicle. Note: Use a pench to bend the fingers on the bracket vertically. Bracket (L) Bracket (R) Appended Screws (q or w). Select appropriate ones matching the hole shape of the bracket. q Binding-Head Sdrew x 8 (5 mmφ x 8 mm) CQ-VX2200W ¡If a special kit (option) is necessary for a certain year's, model or grade of vehicle, please consult your dealer. ¡For electrical connecting simply to your vehicle, you can buy a prepared power connector from your dealer. w Flat-Head Screw x 8 (5 mmφ x 8 mm) Note: Binding-Head screws (5 mmφ x 8) q are appended four pieces, the other four pieces are fixed on the transportation bracket. [Screw with washer (5 mmφ x 8 mm)] ❏ Installation for except for the above motors For general use kit (option) or motor's special kit (option), Please consult your dealer. CQ-VX2200W 35