Panasonic CQ-VX2200 Operating Instructions - Page 35

■ Cassette Tape (continued) Trouble High tones are improperly emphasized. Reproduction of high tones is poor. Wow and flutter is very high. E N G L I S H Cause / Step 312 Dolby B NR tape plays with Dolby B NR off. aSet Dolby B NR to ON. Metal type tape plays with normal mode. aChange Normal mode to Metal mode. Non-Dolby B NR tape plays with Dolby B NR on. aSet Dolby B NR to OFF. Normal type tape plays with Metal mode. aChange Metal mode to Normal mode. Heads are magnetized. aDemagnetize heads. (Ask a service representative for advice.) Tape running mechanism is dirty or out of order. aClean tape running mechanism, or repair it. (Ask a service representative for advice.) ■ Sound Setting Trouble No sound from left, right, front, or rear speaker Left and right sounds are reversed in stereo listening. Only bass or monaural sound from rear speaker ■ Remote Control Trouble Buttons are invalid for operation. Cause / Step Left and right balance, or front and rear balance is off on one side. aAdjust BAL//FAD as appropriate. Cables are not correctly connected. aConnect the cables correctly. The right speaker wire is connected to the left speaker and the left speaker wire to the right speaker. aConnect the speaker wires to the correct one. SBC-SW is set to ON. aSet SBC-SW to OFF. Cause / Step Battery poles (+) (-) are reversed. aInsert the battery correctly. Wrong battery. aCheck the battery. Battery has run down. aReplace the battery. Remote control is in the wrong direction. aDirect the remote control at sensor (REMOTE) on the panel. CQ-VX2200W 41