Panasonic CQC1300U CQC1300U User Guide - Page 20

Electrical Connections, Specifications

Page 20 highlights

E N G Electrical Connections (continued) L I S H Upgrading the System 33 Example combination ≥ CD changer (CX-DP880U, option) Note: ≥ You cannot connect 2 CD changers using the dual CD changer selector (CA-CD55U, option). ≥ For wiring, carefully read the operating instructions for the devices connected. CD changer input cord CD.C-IN R (red) RCA cord (R) RCA cord (L) L (white) DIN cord CD changer (CX-DP880U, option) CD changer control connector Extension cord (supplied with CX-DP880U) Speaker System Connection Example combination ≥ Stereo power amplifier (option) ≥ Front speaker, rear speaker (option) Note: ≥ For wiring, carefully read the operating instructions for the devices connected. RCA cord (option) Stereo power amplifier (option) (bridged connection) Pre-amp output connector (rear) Pre-amp output connector (front) L (white) R (red) External amplifier control power lead (Blue/white stripe) Front speaker (option) Remove the vinyl cap. Rear speaker (option) 46 CQ-C1300U Specifications E N G L I S General FM Stereo Radio H Power supply: DC 12 V (11 V-16 V), test voltage 14.4 V, negative ground Current consumption: Less than 2.2 A (CD mode; 0.5 W 4-speaker) Maximum power output: 50 Wk4 (at 1 kHz) volume control maximum Tone adjustment range: Bass: d12 dB at 100 Hz Treble: d12 dB at 10 kHz Speaker impedance: 4-8 ≠ Pre-amp output voltage: 2.5 V (CD mode; 1 kHz, 0 dB) Pre-amp output impedance: 200 ≠ Dimensions (WkHkD): 7qk115/16qk61/8q (178k50k155 mm) Weight: 3 lbs. 1 oz (1.4 k ) Frequency range: 87.9 MHz-107.9 MHz 34 Usable sensitivity: 10.2 dBf. (0.9 ¨V, 75 ≠) 50 dB quieting sensitivity:15.2 dBf. (1.6 ¨V, 75 ≠) Frequency response: 30 Hz-15 kHz (d3 dB) Alternate channel selectivity: 75 dB Stereo separation: 35 dB (1 kHz) Image response ratio: 75 dB IF response ratio: 100 dB Signal to noise ratio: 62 dB AM Radio Frequency range: Usable sensitivity: 530 kHz-1 710 kHz 27 dB/¨V (11 V, S/N 20 dB) CD Player Sampling frequency: DA converter: Pick-up type: Light source: Wave length: Frequency response: Signal to noise ratio: Total harmonic distortion: Wow and flutter: Channel separation: 8 times oversampling 4 DAC system Astigma 3-beam Semiconductor laser 780 nm 20 Hz-20 kHz (d1 dB) 96 dB 0.01 % (1 kHz) Below measurable limits 75 dB Above specifications comply with EIA standards. Note: ≥ Specifications and design are subject to modification without notice due to improvements. CQ-C1300U 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21

46
CQ-C1300U
CQ-C1300U
47
CD.C-IN
Electrical Connections
(continued)
Upgrading the System
Example combination
CD changer (CX-DP880U, option)
CD changer input cord
R (red)
CD changer control
connector
RCA cord (R)
RCA cord (L)
DIN cord
E
N
G
L
I
S
H
33
E
N
G
L
I
S
H
34
L (white)
Note:
You cannot connect 2 CD changers using the dual
CD changer selector (CA-CD55U, option).
For wiring, carefully read the operating
instructions for the devices connected.
CD changer
(CX-DP880U, option)
Extension cord
(supplied with CX-DP880U)
Speaker System Connection
Example combination
Stereo power amplifier (option)
Front speaker, rear speaker (option)
Stereo power amplifier
(option)
(bridged connection)
Rear speaker (option)
RCA cord
(option)
Front speaker (option)
External amplifier
control power lead
(Blue/white stripe)
Pre-amp output connector (rear)
Pre-amp output connector (front)
L (white)
R (red)
Note:
For wiring, carefully read the operating
instructions for the devices connected.
FM Stereo Radio
Frequency range:
87.9 MHz–107.9 MHz
Usable sensitivity:
10.2 dBf. (0.9
¨
V, 75
)
50 dB quieting sensitivity: 15.2 dBf. (1.6
¨
V, 75
)
Frequency response:
30 Hz–15 kHz (
d
3 dB)
Alternate channel selectivity
: 75 dB
Stereo separation:
35 dB (1 kHz)
Image response ratio:
75 dB
IF response ratio:
100 dB
Signal to noise ratio:
62 dB
AM Radio
Frequency range:
530 kHz–1 710 kHz
Usable sensitivity:
27 dB/
¨
V
(11 V, S/N 20 dB)
CD Player
Sampling frequency:
8 times oversampling
DA converter:
4 DAC system
Pick-up type:
Astigma 3-beam
Light source:
Semiconductor laser
Wave length:
780 nm
Frequency response:
20 Hz–20 kHz (
d
1 dB)
Signal to noise ratio:
96 dB
Total harmonic distortion
:
0.01 % (1 kHz)
Wow and flutter:
Below measurable limits
Channel separation:
75 dB
General
Power supply:
DC 12 V (11 V–16 V),
test voltage 14.4 V,
negative ground
Current consumption:
Less than 2.2 A
(CD mode;
0.5 W 4-speaker)
Maximum power output: 50 W
k
4 (at 1 kHz)
volume control maximum
Tone adjustment range:
Bass:
d
12 dB at 100 Hz
Treble:
d
12 dB at 10 kHz
Speaker impedance:
4–8
Pre-amp output voltage:
2.5 V
(
CD mode; 1 kHz, 0 dB
)
Pre-amp output impedance
: 200
Dimensions (W
k
H
k
D): 7
qk
1
15
/
16
qk
6
1
/
8
q
(178
k
50
k
155 mm)
Weight:
3 lbs. 1 oz (1.4 k
)
Above specifications comply with EIA standards.
Note:
Specifications and design are subject to modification without notice due to improvements.
Specifications
Remove the vinyl cap.