Panasonic CQC5305U CQC5305U User Guide - Page 12
Function Setting, Audio Setting
UPC - 037988758036
View all Panasonic CQC5305U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Audio Setting Adjustment to each speaker and an optional subwoofer 1 Press [VOL] (PUSH SEL: Select) to open the menu. 2 Press [VOL] (PUSH SEL: Select) to select a mode to be adjusted. 3 Turn [VOL] clockwise or counterclockwise to adjust. SQ Adjustment ( page 13) (Adjustable frequency: 12 dB to 12 dB (by 2 dB)) Setting range: SQ Low/Bass: SQ Mid: SQ High/Treble: ±12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz) ±12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz) ±12 dB (at 8 kHz, 10 kHz, 12 kHz, 15 kHz) Audio Menu Display Notes: • The sequence and contents of setting items may depend on the conditions of devices to be connected. For further information, refer to the System Upgrade Guidebook or the instruction manuals for the devices to be connected. • To return to the regular mode, press [DISP]. • If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment, 10 seconds in the SQ adjustment), the display returns to the regular mode. • The volume can also be adjusted directly using [VOL] on the main unit. ( page 12) • Please refer to page 13 for calling up a preset SQ. Volume Adjustment (Setting range: 0 to 40, Default: 18) : Up : Down Balance Adjustment (Setting range: L (left) 15 to R (right) 15 and Center, Default: Center) : Right enhanced : Left enhanced Fader Adjustment (Setting range: R (rear) 15 to F (front) 15 and Center, Default: Center) : Front enhanced : Rear enhanced Subwoofer Level Adjustment (Setting range : mute 6 dB to 6 dB, 2 dB Step, Default: 0 dB) : Up : Down Bass Adjustment (Setting range: 12 dB to 12 dB, 2 dB Step, Default: Bass 0 dB) : Up : Down Subwoofer Low Pass Filter (Setting range: 80 Hz, 120 Hz, Default: 80 Hz) : 120 Hz : 80 Hz Treble Adjustment (Setting range: 12 dB to 12 dB, 2 dB Step, Default: Treble 0 dB) : Up : Down Note: Do not activate SQ and Bass/Treble at the same time to avoid causing sound distortion. Re-master Setting High-range signal lost through MP3/WMA/AAC compression is reproduced to more closely recreate the pre-compression sound. (Setting range: On/Off, Default: On) : On : Off Notes: • At high bit rates, the Re-master function may have little effect. • It is only effective for playback of MP3/WMA/AAC data. 22 CQ-C5405U/C5305U Function Setting Function Menu Display 1 Hold down [VOL] (PUSH SEL: Select) for 2 sec. or more to open the menu. Mute/Attenuation You can select mute or attenuation. : Volume down by 10 steps 2 Press [VOL] (PUSH SEL: Select) to select a mode to be adjusted. 3 Turn [VOL] clockwise or counterclockwise to adjust. Notes: • The sequence and contents of setting items may depend on the conditions of devices to be connected. For further information, refer to the System Upgrade Guidebook or the instruction manuals for the devices to be connected. • To return to the regular mode, press [DISP]. • If no operation takes place for more than 5 seconds in function setting, the display returns to the regular mode. Demonstration You can set up the monitor to display or hide the demonstration screen. : On (Default) : Volume off (Default) AUX1 Skip If AUX1 is not used, the AUX1 mode is skipped when selecting the source. : On (Skip disabled.) (Default) : Off (Skip enabled.) : Off Note: Button operation with either the main unit or remote control allows users to cancel the demonstration screen for 20 seconds and enable the selected operation even in the demo-on mode. Display Color Selection You can select display color. Default: OCEAN (aqua blue) Variety: OCEAN (aqua blue), SKY (sky blue), FOREST (green), ORANGE (amber), FIRE (red), PINK (deep pink), ROSE (pink), STORM (7 colors) OCEAN (aqua blue) ORANGE (amber) STORM (7 colors) CQ-C5405U/C5305U 23 Audio Setting, Function Setting English