Panasonic DMC-FX37A Digital Still Camera - Page 106
The subject is not focused properly., or 3 pictures are taken at one time.
UPC - 037988988044
View all Panasonic DMC-FX37A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Others The recorded picture is whitish. • The picture can become whitish if there is dirt e.g. fingerprints on the lens. > If the lens is dirty, turn on the camera, eject the lens barrel (P11) and gently wipe the lens surface with a soft dry cloth. The area around where the pictures were taken becomes dark. • Was this picture taken with the flash at the close range when the zoom is near [W] (1k)? > Zoom in a little, and then take the pictures. (P30) • Is this a picture taken in [PIN HOLE] in scene mode? The recorded picture is too bright or dark. > Check that the exposure is correctly compensated. (P42) • Setting the [MIN. SHTR SPEED] to faster speed might make the picture darker. > Set the [MIN. SHTR SPEED] to slower speed. 2 or 3 pictures are taken at one time. > Set auto bracket (P43), [HI-SPEED BURST] (P49), [FLASH BURST] (P49) in scene mode or [BURST] (P63) of the [REC] mode menu to [OFF]. The subject is not focused properly. • The focus range varies depending on the recording mode. > Set to the proper mode for the distance to the subject. • The subject is beyond the focus range of the camera. (P28) • There is camera shake (jitter) or the subject is moving slightly. (P29) The recorded picture is blurred. The optical image stabilizer is not effective. > The shutter speed becomes slower when pictures are taken in dark places so hold the camera firmly with both hands to take the pictures. (P25) > When taking pictures at a slow shutter speed, use the self-timer. (P41) Taking pictures using auto bracket is not possible. • Is the number of recordable pictures 2 or less? The recorded picture looks rough. Noise appears on the picture. • Is the ISO sensitivity high or the shutter speed slow? (ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures indoors etc. noise will appear.) > Decrease the ISO sensitivity. (P60) > Set [COLOR MODE] to [NATURAL]. (P65) > Take pictures in bright places. • Has [HIGH SENS.] or [HI-SPEED BURST] in the scene mode been set? If so, the resolution of the recorded picture decreases slightly because of high sensitivity processing, but this is not a malfunction. 106 VQT1R87