Panasonic DMC-FX8-K Digital Still Cam/non Usa - Page 86
CONNECTING TO A PC, Turn the camera on and then set, USB MODE] on the [SETUP], menu to [PC]. P85 - drivers
UPC - 037988985319
View all Panasonic DMC-FX8-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Connecting to a PC or Printer Connecting to a PC You can load pictures recorded with the camera to a PC by connecting the camera and PC. The software [LUMIX Simple Viewer] (for Windows® ) in the CD-ROM (supplied) allows you to load pictures recorded with the camera to a PC, print, or send them by e-mail easily. If you use Windows 98/98SE, install the USB driver and then connect it to the computer. For details of [LUMIX Simple Viewer] and installation, refer to the separate operating instructions for PC connection. 1 Turn the camera on and then set [USB MODE] on the [SETUP] menu to [PC]. (P85) • If you set [USB MODE] to [PictBridge (PTP)] and then connect the camera to the PC, messages may appear on the screen of the PC. Select [Cancel] to close the indications and disconnect the camera from the PC. Connect the camera after you set [USB MODE] again. 2 Connect the camera to a PC via the USB connection cable A (supplied). • Connect the USB connection cable with the [ ] mark facing the [2] mark on the [DIGITAL] socket. • Hold the plug C to push into or pull out. AV OUT DIGITAL DC IN A: USB connection cable (supplied) B: AC adaptor (DMW-AC5; optional) • For using the AC adaptor (DMW-AC5; optional), turn the camera off before the connection. ACCESS D: This message appears during data transfer. [Windows] The drive appears on the [My Computer] folder. • If it is the first time you are connecting the camera to a PC, the required driver is installed automatically so that the camera can be recognized by the Windows Plug and Play, then it appears on the [My Computer] folder. [Macintosh] The drive is displayed on the screen as [NO_NAME] or [Untitled]. 86 VQT0R26