Panasonic DMC-FX8-K Digital Still Cam/non Usa - Page 87
PictBridge PTP setting, Folder Composition
UPC - 037988985319
View all Panasonic DMC-FX8-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Connecting to a PC or Printer ∫ Folder Composition The folder structure of the card or MultiMediaCard is displayed as the illustration below. • If the remaining battery power is exhausted during communication, the recorded data may be damaged. When ≥SD Memory Card ≥MultiMediaCard DCIM 100_PANA 1 you connect the camera to the PC, use a battery with sufficient battery power (P14) or the AC adaptor (DMW-AC5; optional). • If the remaining battery power becomes 100_PANA low during communication, the battery P1000001.JPG 23 P1000002.JPG indication turns red and blinks (P14) and the alarm beeps. In this case, stop the communication at once. • While [ACCESS] is being displayed, do P1000999.JPG 101_PANA not disconnect the USB connection cable. • When the OS of your PC is Windows 2000 and you connect the camera to 999_PANA the PC with the USB connection cable, do not replace the card with the MISC camera connected to the PC. The 1 Folder number 2 File number 3 JPG: pictures MOV: motion images Files will be saved in each folder as follows. DCIM Folders from [100_PANA] to [999_PANA] information in the card may be damaged. Make sure to disconnect the USB connection cable beforehand when you replace the card. For details, refer to the separate operating instructions for PC connection. • Do not use any other USB connection cables except the supplied one. 100_PANA Pictures/motion images • Also refer to the operating instructions of MISC Files on which the DPOF the PC. print settings are recorded • Image data of up to 999 pictures recorded by the camera can be included in 1 folder. If the number of picture data exceeds 999, another folder will be created. • When you reset the file number or the folder number, select [NO.RESET] in the [SETUP] menu. (P20) ∫ PictBridge (PTP) setting Even if you set the [USB MODE] to [PictBridge (PTP)], you can connect to the PC only when the OS is Windows XP Home Edition, Windows XP Professional or Mac OS X. • You can only load pictures from the camera and cannot write them on the card or delete them. • When there are 1000 or more pictures on a card, the pictures may not be imported. 87 VQT0R26