Panasonic FV08VF2 Installation Instructions - Page 4
Specifications, Unpacking, General, Safety, Information
View all Panasonic FV08VF2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
SPECIFICATIONS Duct Model No, Air direction V Hz diameter Noise Power consumption Speed (inches) (sones) (W) (rpm) FV-05VF2 3 0.5 4 0.4 3 0.8 FV-08VF2 Exhaust 120 60 4 0.8 FV-11VF2 3 1.5 4 1.5 Specifications are based on HVI standard. 15 740 15 635 24 845 24 755 33 1230 33 830 Air deliver (cfm) 50 50 70 80 90 110 Weight lb.(kg) 10.6 (4,8) 11.0 (5,0) 11.2 (5.1) UNPACKING Unpack and carefully remove unit from carton. Refer to the Supplied Accessories list to verify that all parts are present. GENERAL SAFETY INFORMATION 1. Do not install this ventilating fan where interior room temperature may exceed 104°F (40°C). 2. Make sure that the electric service supply voltage is 120 V, 60 Hz. 3. Follow all local electrical and safety codes, as well as the National Electrical Code (NEC) and the Occupation Safety and Health Act (OSHA) 4. Always disconnect the power source before working on or near the fan, motor or junction box. 5. Protect the power cord from sharp edges, oil, grease, hot surfaces, chemicals or other objects, 6, Do not kink the power cord. 7, Do not install the unit where ducts are configured as shown in Fig. A. 8. Provide suction parts with proper ventilation. 9. This unit is UL listed for use over a bathtub or shower when installed in a GFCI protected branch circuit, 0 Prohibition 0 Prohibition Prohibition Fig. A 0 Prohibition Adaptor 4