Panasonic GPUS932CUS GPUS932CU User Guide - Page 12

!8 12 V DC power connector [DC 12V IN] This connector is used to connect an external DC power supply of 12 volts (2 A or more). Important: • A class 2 power supply of 12 V DC (10.8 to 13.2 volts) shall be used. Compatible connector HR10A-7P-4S (73) manufactured by HIROSE ELECTRIC CO., LTD. (as of October 2007) Pin arrangement of applicable connector 1 4 2 3 (Cable side) !9 RS-232C port [RS-232C] This port is used to perform external control. Please contact your dealer for further information. @2 SDI output connector [SDI] (* only for GP-US932CUS, GP-US932CUSE) This connector provides HD-SDI or SD-SDI output signals. Important: • Please use a high quality cable compatible with HD-SDI. (D-sub 9-pin connector, female) 5 1 9 6 Pin number 1 2 3 4 5 6 7 8 9 Signal GND TXD RXD DSR GND DTR CTS RTS GND @0 S-video output connector [S-VIDEO] This connector provides the luminance signal (Y) output and color signal (C) output with synchronizing signals. @1 RGB/YPbPr connector [RGB/YPbPr] This connector provides the RGB signal (red, green, and blue) output or the YPbPr signal (luminance, color difference B, and color difference R) output. The output signal can be set up with use of "OUTPUT SEL" in the SETUP menu. ( page 19) (D-sub 9-pin connector, male) 1 5 6 9 Pin number 1 2 3 4 5 6 7 8 9 Output signal GND GND R, Pr G, Y B, Pb VIDEO SYNC GND GND 12