Panasonic GPUS932CUS GPUS932CU User Guide - Page 24

10. Synchronization setting [SYNC] The synchronization state is displayed. The horizontal phase in the external synchronization can also be adjusted. The internal synchronization is indicated as "INT", and the external synchronization is indicated as "EXT". The horizontal phase in the external synchronization is adjusted. Top screen of SETUP menu ** SET UP ** P2 SCENE FILE *FILE1 WHITE BAL AWC BLACK BAL *MANU SYNC INT ELECTRIC ZOOM OFF FREEZE OFF END 11. Electronic zoom setting [ELECTRIC ZOOM] Selection "ON" (default) or "OFF" determines whether or not to use the electronic zoom. To prevent the electronic zoom from being active by mistake, select "OFF". When "ON" is selected, assignment of the zoom function to the [e] and [f] buttons in the SEL menu allows users to scale up (up to 2.5 times) or scale down a photographic subject with use of the [e] or [f] button. Notes: • Calling up the SETUP menu cancels scale up and down. • When "ELECTRIC ZOOM" is set to "OFF", "ZOOM OFF" appears in the SEL menu, and the zoom function is not adjustable. "SYNC" screen ** SYNC ** H PHASE -....|....+ RET END z Set the synchronizing signal input/output selection switch on the rear face of the CCU to "IN". x Connect the video synchronizing signal to the synchro- nizing signal output/input connector. c Perform the settings of the function setup switches 1 and 2 in accordance with the video format used by the device to be synchronized. ( page 11) v Move the cursor to "SYNC" on the top screen of the SETUP menu. b Press the [SEL] button after making sure that "EXT" appears. → The "SYNC" screen appears. n Connect the Y or G signal from the RGB/YPbPr output connector and the video synchronizing input signal to an oscilloscope, observe the horizontal synchronization component. m Adjust the horizontal phase with use of the [e] or [f] button. 12. Image freezing [FREEZE] Selection "ON" (default) or "OFF" determines whether or not to enable the freeze function. When "ON" is selected, pressing the [FREEZE (MENU)] button on the front face of the CCU allows users to display the video currently displayed as a static image. ( page 9) s Default setting restoring • When the settings of the level indicators (-....I....+) in the SETUP menu or SEL menu are reset to the default, hold down both of the [e] and [f] buttons simultaneously for more than 2 seconds. • When all the settings in the SETUP and SEL menu are reset to the default, move the cursor to "END" on the bottom line, and hold down both of the [FREEZE (MENU)] and [h] buttons simultaneously for more than 2 seconds. 24