Panasonic HL-CX667 Operating / Installing Instructions - Page 23
Introduction, Electrical Connection, Installation Instructions
View all Panasonic HL-CX667 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
English Installation Instructions For Installer Introduction WARNING If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. RISK OF ELECTRIC SHOCK WITHOUT ELECTRICAL GROUNDING CONNECTION You must disconnect the neutral from the grounding lead. Connect the appliance in accordance with local electrical codes. For model rated up to 4.3 kW connect to a 20 A fuse or circuit breaker. Please read these instructions. They will save you time and effort and help to ensure optimum oven performance. Be sure to observe all WARNINGS. These installation instructions are intended for use by a qualified installer. In addition to these instructions, the oven shall be installed in accordance with Canadian Electric Code C22.1-latest edition/Provincial and Municipal codes and/ or local codes. These shall be carefully followed at all times. NOTE: IF INSTALLING YOUR OVEN IN CANADA PLEASE CHECK TO MAKE SURE THAT YOU HAVE A MODEL WITH THE CANADIAN LISTING MARK, AS SHOWN ON THE RIGHT. Electrical Connection WARNING The means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules. Electrical Supply Before installing the oven have a qualified electrician verify that your home is provided with adequate electrical service and that the addition of the oven will not overload the branch circuit on which it is to be installed. A separate 3-wire or 4-wire single phase, 120 V/240 V, 60 Hz, or a 120 V/208 V, 60 Hz branch circuit is required. For hook-up of the oven you will need to have an approved junction box installed where it will be easily reached through the front of the cabinet where the oven will be located. The oven has 130 cm (51 3/16 in.) of conduit. Allow 130 to 150 cm (51 3/16 to 59 1/16 in.) of slack in the line so that the oven can be moved if servicing is ever necessary. DO NOT shorten the flexible conduit. EN-21