Panasonic HX-A1 HX-A1 Owner s Manual - Page 14
Charging and recording time
View all Panasonic HX-A1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Charging and recording time ∫ Charging/Recording time ≥ Temperature: 25 oC (77 oF)/humidity: 60%RH Charging time Picture size/Frame rate Maximum continuous recordable time Actual recordable time [1920k1080/30p] 1 h 15 min [1280k720/60p] 1 h 5 min 3h [1280k720/30p] [848k480/30p] 1 h 20 min 1 h 25 min [1280k720/60fps] [848k480/120fps] 1 h 10 min 35 min 40 min 35 min ≥ "h" is an abbreviation for hour, "min" for minute and "s" for second. ≥ These times are approximations. ≥ The indicated charging time is for when the battery has been discharged completely. Charging time and recordable time vary depending on the usage conditions such as high/ low temperature. ≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping recording, turning this unit on/off, etc. ≥ The power lamp flashes (Flashing with approx. 0.5 second period (off for approx. 0.25 second, on for approx. 0.25 second)) when the remaining battery time becomes low. You can check the battery level by looking at the "Image App" screen (l 26) or the recording mode lamps (l 16). ≥ This unit heats up after use or charging. This is not a malfunction. ≥ For information about charging with a mobile USB charger or an AC adaptor, check the support site. http://panasonic.jp/support/global/cs/e_cam/index.html (This site is English only.) The socket outlet shall be installed near the equipment and shall be easily accessible. When the Power lamp is flashing during charging Flashing with approx. 0.5 second period (off for approx. 0.25 second, on for approx. 0.25 second): ≥ Check that the USB terminals of this unit or the connecting device, such as PC are not dirty or covered with a foreign object, and reconnect correctly. If a foreign object or dirt is present, turn off this unit before removing. ≥ The environment is at an extremely high or low temperature. Wait until the temperature has returned to an appropriate level and try charging again. If you are still unable to charge, there may be a fault in this unit or the connecting device. Flashing with approx. 4 second period (off for approx. 2 seconds, on for approx. 2 seconds): ≥ When the battery is over discharged or the temperature of the battery is too high or low. It can be charged, but it may take a few hours to complete the charging normally. ≥ It will flash in approx. 2 second intervals when normal charging resumes. Even in such cases, it may start flashing in approx. 4 second intervals until charging is completed depending on the conditions of use. Off: ≥ Charging has finished. 14 SQT0885 (ENG)