Panasonic HX-A1 HX-A1 Owner s Manual - Page 23
Attaching this unit to the Multi Mount
![]() |
View all Panasonic HX-A1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4 Attach this unit to the Multi Mount as shown in the figure. Attaching this unit to the Multi Mount ≥ Before attaching this unit, fasten the Multi Mount securely with the band and the hook and loop fastener. 1 While holding the tightening nut A, tighten the adjustment knob B by rotating it towards LOCK. 2 While holding the adjustment knob B, loosen the the adjustment belt C until this unit can be passed through it by rotating the tightening nut A towards UNLOCK. 3 Pass this unit through the adjustment belt C so that this unit is in the position shown in the figure. LOCK UNLOCK 4 While holding the adjustment knob B, tighten the adjustment belt C by rotating the tightening nut A towards LOCK until this unit is fastened securely. ≥ Adjust the adjustment belt with hands. Do not apply too much force. ≥ Do not rotate the tightening nut more than necessary after fastening this unit. ≥ Check the left/right tilt of this unit after fastening it. ≥ To correct the left/right tilt of this unit, loosen the adjustment belt. LOCK 23 (ENG) SQT0885
![](/manual_guide/products/panasonic-hxa1-hxa1-owner-s-manual-f0c97d4/23.png)