Panasonic HX-A1M Owners Manual - Page 54

Others Optional accessories Some optional accessories may not be available in some countries. About the Video Camera Mount (For Handlebar) You can attach the Video Camera Mount (For Handlebar)/RP-CMC10 as follows. ≥ To use the Video Camera Mount (For Handlebar)/RP-CMC10, the Tripod Mount (supplied) is required. ≥ Please also refer to the operating instructions of the Video Camera Mount (For Handlebar). ≥ Refer to page 26 for information on the Tripod Mount. ∫ When attaching the Video Camera Mount (For Handlebar) and Tripod Mount 1 Remove the Quick Shoe of the Video Camera Mount (For Handlebar) from the camera platform. 2 Align the camera screw of the Quick shoe with the tripod mounting hole of the Tripod  Mount, and insert the camera screw.   A Tripod Mount (supplied) B Camera screw C Quick shoe 3 Turn the hinge at the back side of the Quick Shoe to tighten the camera screw (clockwise). ≥ Hold the Tripod Mount with your hand so that it will not rotate with the camera screw. ≥ After tightening the camera screw, fix the hinge. 4 Attach the Quick Shoe to the camera platform. ≥ Align on the Quick Shoe with on the camera platform, and push the Quick Shoe diagonally until it clicks into place. 5 Attach this unit to the Tripod Mount. (l 26) ∫ When removing the Video Camera Mount (For Handlebar) and Tripod Mount To remove the Video Camera Mount (For Handlebar) and Tripod Mount, perform the steps for mounting them in reverse order. - 54 -