Panasonic HXDC1 HXDC1 User Guide - Page 173

IMPORTANT MESSAGES AND ALERTS About the scene mode function and focus setting i The scene mode changes to when the focus is set to or -. i Even if the focus is set to or -, it changes to * when the scene mode is set to any setting other than . About the status indicator when charging the battery pack When the status indicator is flashing fast or slow, it may indicate one of the following conditions. Flashing at about 4-second intervals (2 seconds on, 2 seconds off): slower i This may indicate that the battery has been fully discharged, or when the battery temperature is high or low. The battery can be charged, but in some cases it may take several hours to fully charge it. i During normal charging, the status indicator flashes at about 2-second intervals. However, even in this case, depending on the ambient conditions, the status indicator may flash at 4-second intervals until the battery is fully charged. Flashing at about 0.5-second intervals (0.25 seconds on, 0.25 seconds off): faster i The battery pack cannot be charged. Remove the battery pack from the camera once and reinsert it, then begin charging it again. i Check to see that there is no dust, grime or foreign matter adhering to the camera or battery, and make sure that the battery pack is correctly inserted. Turn off the camera before cleaning it of dust, grime or other foreign matter. i The battery pack or the ambient temperature is very high or very low. Try charging the battery pack again after it has returned to a suitable temperature. If the battery pack still cannot be charged, it is possible that the camera, the battery pack or the AC adaptor may be defective. Off: i Charging is complete. i If the status indicator turns off even though charging is not completed, it is possible that the camera, the battery pack or the AC adaptor may be defective. VQT3M88 173