Panasonic KV-S1027C Operating Instructions - Page 15
Start/Stop button, KV-S1057C and KV-S1027C only, OK button, KV-SL1066, KV-SL1056, KV-SL1055, KV- - error codes
View all Panasonic KV-S1027C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Location of Controls F Start/Stop button • If you set [Wait Key] for "Manual Feed Mode" in your application software, pushing this button starts scanning. For details about "Manual Feed Mode", refer to the Image Capture Plus, TWAIN, or ISIS help. • During scanning, pushing this button stops scanning. • If you press this button after a double feed is detected and scanning has been paused, the document (or documents) detected as a double feed will be ejected from the scanner without being scanned. Scanning will stop. n KV-S1057C and KV-S1027C only G LCD H OK button If you are using the scanner with Image Capture Plus, you can perform a push scan using the LCD. Registered jobs are displayed on the LCD. Use the cursor button (D) to select a job. Also, error codes and messages corresponding to the scanner status are displayed on the LCD. n KV-SL1066, KV-SL1056, KV-SL1055, KV-SL1036 and KV-SL1035 only I 7-segment LED If you are using the scanner with Image Capture Plus, you can perform a push scan using the 7-segment LED. A registered job number is displayed on the 7-segment LED. Use the cursor button (D) to select a job. Operating Manual 15