Panasonic KV-S4065CL High Speed Color Scanner - Page 78
Symptom, Possible Cause, Remedy, The document set on the hopper has
UPC - 092281877075
View all Panasonic KV-S4065CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Appendix Symptom Double feeding occurs frequently or the scanner stops loading while scanning. Paper jams occur frequently. Scanned image is skewed. Possible Cause Remedy The paper feed rollers, separation roll- Clean the paper feed rollers, separation ers, double feed prevention roller, drive rollers, double feed prevention roller, rollers, or free rollers are dirty. drive rollers, or free roller. (Page 49) The paper feed rollers, separation roll- Replace the paper feed rollers, separa- ers, or double feed prevention roller tion rollers (page 59), or double feed have become worn down. prevention roller (page 62). Right and left sides of the document to be scanned are not the same in height, because of curling or folding. Flatten the document (page 21) and load it again after reducing the pages. The document is printed on an unsupported type of paper or thick paper. Make a copy of the document on paper of an acceptable type and thickness (page 20), and scan the copy. The length of the paper is too short. Make a copy of the document on paper of an acceptable size (page 20), and scan the copy. The feeding method is set to manual. Set the feeding method to auto with the ADF select key. (Page 16) The paper thickness mode is not ap- Change the paper thickness mode. propriate for the documents. (Page 24) The document is not aligned correctly. Realign the document. (Page 26) The document set on the hopper has too many pages. Remove pages from the document until it is under the limit mark on the document guides. The paper thickness mode is not ap- Change the paper thickness mode. propriate for the documents. (Page 24) The document is wrinkled. Smooth out the document. The rollers are dirty. Clean the rollers. (Page 49) The document is not aligned correctly. Realign the document. (Page 26) The document set on the hopper has too many pages. Remove pages from the document until it is under the limit mark on the document guides. The document guides are not adjusted to the size of the document to be scanned, or the document to be scanned is set slanted on the hopper. Adjust the document guides properly to the size of the document to be scanned (page 26). Right and left sides of the document to be scanned are not the same in height, because of curling or folding. Flatten the document (page 21) and load it again after reducing the pages. 78 Operating Manual