Panasonic KX-HN1032W Operating Instructions - Page 13
Reattaching the camera base, For assistance, please visit
![]() |
View all Panasonic KX-HN1032W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
3 Drive the supplied screw into the camera unit. 1 1 Supplied screw (page 9) 4 Drive the screws (not supplied) into the wall. 2 Longer than 20 mm (25/32 inches) 3 Space 1.3 mm (1/32 inches) Getting Started 6 Adjust the angle of the camera unit by using MFN, MEN, MDN, or MCN on the monitor unit. Reattaching the camera base 1 Take the camera unit off from the wall. 2 Remove the screw and then remove the wall mounting adaptor from the camera unit. 1 2 3 Note: R Use the following template when determining the location of the screw holes. 1 Supplied screw (page 9) 3 Attach the camera base to the camera unit. 31 mm (1 7/32 inches) 5 Mount the camera unit to the wall. 4 Screws 5 31 mm (1 7/32 inches) 5 4 4 Drive the supplied screw into the camera unit. 1 1 Supplied screw (page 9) For assistance, please visit http://shop.panasonic.com/support 13 HN4001_(en_en)_0517_ver.020.pdf 13 2019/05/17 13:52:59
![](/manual_guide/products/panasonic-kxhn1032w-operating-instructions-06f904c/13.png)