Panasonic KX-HN1032W Operating Instructions - Page 14
Setting up the monitor unit, Battery installation, Battery charging
View all Panasonic KX-HN1032W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Getting Started Setting up the monitor unit 5 Drive the screw into the battery cover. Battery installation R USE ONLY the specified battery. 1 Remove the screw from the battery cover. 2 Remove the battery cover. R Follow the directions on the display to set up the unit. Battery charging 1 Insert the AC adaptor plug (A) firmly into the monitor unit's micro-USB connector. 2 Connect the AC adaptor (B) to the power outlet. 3 Insert the battery. 1 BLK: black 2 RED A B 2 1 4 Insert the tabs (A) into the slots, and then close the battery cover (B). 2 1 Charge for about 8 hours. Note: R Use only the supplied AC adaptor S006AKU0500100. R When the AC adaptor plug is connected to the monitor unit's micro-USB connector, is displayed on the screen. R It is normal for the monitor unit to feel warm during charging. R The monitor unit resets if the AC adaptor is disconnected when charging. 14 For assistance, please visit http://shop.panasonic.com/support HN4001_(en_en)_0517_ver.020.pdf 14 2019/05/17 13:52:59