Panasonic KX-HNC600 Installation Guide - CA - Page 27

Appendix Specifications R Standards DECT (Digital Enhanced Cordless Telecommunications) R Frequency range DECT: 1.92 GHz - 1.93 GHz R RF transmission power DECT: 115 mW (max.) R Power source 120 V AC, 60 Hz R Power consumption Standby: 2.3 W During operation: 3.1 W (when the LED lights are not lit) 4.5 W (when the LED lights are lit) R Operating conditions -20 °C - 50 °C (-4 °F - 122°F) up to 90 % relative humidity (non-condensing) R Transmitting range Approx. 50 m (160 feet) indoors Approx. 300 m (1,000 feet) outdoors R Image sensor 0.3 megapixel CMOS R Minimum illuminance required 0 lx*1 R Focal length Fixed (0.4 m (1.3 feet) - infinity) R Angular field of view (camera angle) Horizontal: approx. 70° Vertical: approx. 50° R Motion detection method Pyroelectric infrared sensor (PIR sensor) and visual sensor R PIR sensor detection range (when the surrounding temperature is approx. 25 °C (77 °F)) Horizontal: approx. 70° Vertical: approx. 20° Detection range: approx. 5 m R Visual sensor detection range Horizontal: approx. 70° Vertical: approx. 50° R IP rating IP55*2 R Adjustable mounting angles Horizontal: ±90° Vertical: facing forward - facing down approx. 60° (adjustable when mounting) R Dimensions (height ´ width ´ depth) Approx. 75 mm ´ 75 mm ´ 173 mm (2 15/16 inches ´ 2 15/16 inches ´ 6 13/16 inches) R Mass (weight) Approx. 305 g (0.67 lb) *1 The infrared LEDs that surround the camera lens will illuminate in low-light conditions. *2 Water resistance is only assured if the camera is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken. For assistance, visit www.panasonic.ca/english/support 27 HNC600C_(en_en)_0113_ver.201.pdf 27 2017/01/13 11:54:14