Panasonic KX-HNS103 Operating Instructions CA - Page 18
Removing from the wall
View all Panasonic KX-HNS103 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Setup Removing from the wall n Removing from the wall mounting adaptors 1 Insert a flat screwdriver into the notches on the wall mounting adaptors, and carefully pry away the main unit and probe unit. 2 Remove the screws that secure the wall mounting adaptors to the wall. n Removing when secured with double-sided tape only 1 Tie a piece of thread to two sticks, screwdrivers, etc. 2 Pull the thread tight and use it to cut the double-sided tape, and then remove any excess tape. 1 Excess tape 1 18 For assistance, visit www.panasonic.ca/english/support HNS103C_(en-en)_0224_ver.020.pdf 18 2015/02/24 15:14:55
Removing from the wall
n
Removing from the wall mounting adaptors
1
Insert a flat screwdriver into the notches on the wall mounting adaptors, and
carefully pry away the main unit and probe unit.
2
Remove the screws that secure the wall mounting adaptors to the wall.
n
Removing when secured with double-sided tape only
1
Tie a piece of thread to two sticks, screwdrivers, etc.
2
Pull the thread tight and use it to cut the double-sided tape, and then remove
any excess tape.
1
Excess tape
1
18
For assistance, visit www.panasonic.ca/english/support
Setup
HNS103C_(en-en)_0224_ver.020.pdf
18
2015/02/24
15:14:55