Panasonic KX-HNS103 Operating Instructions CA - Page 19
Testing the sensor, Features available, when using the, Home Network] app, Accessing the User's,
View all Panasonic KX-HNS103 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Appendix Testing the sensor You can check the sensor's LED indicator and test the performance of the sensor. 1 Remove the main unit cover. 2 Press M N. 3 Touch the probes of the probe unit to water. 4 Confirm that the LED indicator lights in red. 5 Press M N again. Features available when using the [Home Network] app Some of the sensor's features that are available when using the [Home Network] app are listed below. For more information, refer to the User's Guide (page 19). - Alarm system You can use the app to arm and disarm the alarm system, confirm the current status of the sensor, and view a log of previous events. - Sensor integration You can configure the sensor to trigger other system events, such as camera recording, turning on an electric device (such as a lamp), etc. (Appropriate device required.) - Telephone alert You can configure the system to call a preprogrammed phone number when the sensor is triggered. Accessing the User's Guide The User's Guide is a collection of online documentation that helps you get the most out of the [Home Network] app. 1 iPhone/iPad Tap in the app's home screen. Android™ devices Tap or press your mobile device's menu button in the app's home screen. 2 Tap [User's Guide]. Note: R Microsoft® Windows® Internet Explorer® 8 and earlier versions are not supported. R Android 4.1 or later versions are recommended. R You can also access the User's Guide at the web page listed below. www.panasonic.net/pcc/support/tel/ homenetwork/manual/ For assistance, visit www.panasonic.ca/english/support 19 HNS103C_(en-en)_0224_ver.020.pdf 19 2015/02/24 15:14:55