Panasonic KX-TG2711 Operating Instructions CA - Page 34

Useful Information Answering system Problem The unit does not record new messages. I cannot operate the answering system remotely. Cause/solution R The answering system is turned off. Turn it on (page 23). R The message memory is full. Erase unnecessary messages (page 24). R If you subscribe to a Voice Mail service, messages are recorded by your service provider/telephone company, not your telephone. Change the unit's number of rings setting or contact your service provider/telephone company (page 27). R The remote access code is not set. Set the remote access code (page 25). R You are entering the wrong remote access code. If you have forgotten your remote access code, enter the remote access code setting to check your current code (page 25). R The answering system is turned off. Turn it on (page 26). Liquid damage Problem Liquid or other form of moisture has entered the handset/base unit. Cause/solution R Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service centre. Caution: R To avoid permanent damage, do not use a microwave oven to speed up the drying process. Registering a handset to the base unit 1 Handset: MMENUN 2 MbN: "Initial setting" a MOKN 3 MbN: "Registration" a MOKN 4 MbN: "HS registration" a MOKN 5 Base unit: Proceed with the operation for your model. n KX-TG2711 series: page 3 Press and hold M N (LOCATOR) for about 5 seconds. (No registration tone) n KX-TG2721 series: page 3: Press and hold M N (LOCATOR) for about 5 seconds until the registration tone sounds. 34