Panasonic KX-TG2730S 2.4 Ghz Cordles Phon - Page 84

Canceling Registration/Re-registration Canceling the Handset Registration If you no longer need to use the handset or if you need to register the handset to a different base unit of the same model, it may be necessary to cancel the registration. Only one handset can be canceled at a time near the base unit. Make sure the handset and the base unit are not being used. 1 Press (CONF/FUNCTION). 2 Scroll to "Initial setting" by pressing Ö or Ñ, and press á. 3 Scroll to "Registration" by pressing Ö or Ñ, and press á. 4 Scroll to "Deregistration" by pressing Ö or Ñ. 5 Press á. Copy directory HInitial setting 2Way radio mode Set base unit HRegistration HS registration HDeregistration Deregistration Enter code:335 :--- 6 Press (3)(3)(5) (DEL.) to delete the registration memory. •If you make a mistake, press (HOLD/CLEAR), and enter "335". Deregistration Enter code:335 Enter codeee:335 OK 7 Press the right soft key ( OK ). •A beep sounds and the registration memory will be erased on both the handset and the base unit. •If 3 beeps sound, you entered a wrong code. The display will return to step 6. Enter "335". •To register the handset to another base unit of the same model, start from step 5 on page 85 or see page 26. Ex. Extension number 2 SP PRIVACY [-] Handset [2] DeDeregistered SP PRIVACY [-] Press MUTE on base unit, then OK on handset to register handset OK •"[-]" is shown on the top right of the display. •You can exit the programming mode any time by pressing (OFF). •The handset will not work. To use it again, registration will be required (p. 26, 85). 84