Panasonic KX-TG2730S 2.4 Ghz Cordles Phon - Page 86

If The Following Appear, Direct

Page 86 highlights

If the Following Appear... If the unit detects a problem, one of the following messages will be displayed on the handset. Error beeps or a busy tone will sound. Display message Recharge battery Cause & Remedy The battery needs to be charged. Recharge the battery (p. 13). Charge for 15HRS The battery has been discharged. The handset will not work. Charge the battery fully (p. 13). No link to base. Walk closer to base and try again. The handset has lost communication with the base unit. Walk closer to the base unit, and try again. Busy • The called handset/base unit is in use. • The handset you tried to send directory items to is in use. • The handset you are calling is too far from the base unit. • The Privacy mode is on for the call you tried to join (p. 55). Invalid • The called handset has not been registered to the base unit or you selected your extension number. • You pressed (9) instead of entering an extension number. Enter the extension number ((0) to (8)) to call. Error!! • When you tried to register or deregister the handset, the handset and the base unit could not link for some reason, such as interference from other electrical appliances. Take the handset and the base unit away from the electrical appliances and try again. • If more than one handset is in use, you may not be able to register/deregister. Try again later. • Another handset tried to send the directory items but the transfer has been stopped (p. 47, 48). Directory DirectFull When trying to store an item in the directory, the directory memory is full. To erase other items from the directory, see page 46. 86

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

86
If the Following Appear...
If the unit detects a problem, one of the following messages will be
displayed on the handset. Error beeps or a busy tone will sound.
Display message
Cause & Remedy
The battery needs to be charged. Recharge the
battery (p. 13).
The battery has been discharged. The handset
will not work. Charge the battery fully (p. 13).
The handset has lost communication with the
base unit. Walk closer to the base unit, and try
again.
The called handset/base unit is in use.
The handset you tried to send directory items to
is in use.
The handset you are calling is too far from the
base unit.
The Privacy mode is on for the call you tried to
join (p. 55).
The called handset has not been registered to
the base unit or you selected your extension
number.
You pressed
(9)
instead of entering an
extension number. Enter the extension number
(
(0)
to
(8)
) to call.
When you tried to register or deregister the
handset, the handset and the base unit could
not link for some reason, such as interference
from other electrical appliances. Take the
handset and the base unit away from the
electrical appliances and try again.
If more than one handset is in use, you may not
be able to register/deregister. Try again later.
Another handset tried to send the directory items
but the transfer has been stopped (p. 47, 48).
When trying to store an item in the directory, the
directory memory is full. To erase other items from
the directory, see page 46.
Recharge battery
Busy
Invalid
Error!!
No link to base.
Walk closer to
base and try
again.
Charge for 15HRS
Directory
Direct
Full