Panasonic KX-TG2730S 2.4 Ghz Cordles Phon - Page 89
Troubleshooting
UPC - 037988472963
View all Panasonic KX-TG2730S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Troubleshooting Cordless Telephone Problem "No link to base. Walk closer to base and try again." is displayed and an alarm tone sounds. Static, sound cuts in/out, fades. Interference from other electrical units. The handset and/or the base unit does not ring. The handset display is blank. You cannot store a name and phone number in the directory. While programming or searching, the handset starts to ring and stops the program/search. You cannot make an internal/external call with the handset. Cause & Remedy •You are too far from the base unit. Walk closer to the base unit and try again. •Plug in the AC adaptor. •Raise the base unit antennas. •Locate the handset and the base unit away from other electrical appliances (p. 3). •Walk closer to the base unit. •Raise the base unit antennas. •Press Ü on the handset to turn on the Reception Booster feature (p. 29). •The ringer volume is OFF. Set to HIGH or MEDIUM or LOW (p. 19, 59). •If more than one other user is using the handsets and base unit, the handset/base unit may not ring. Those users will hear incoming call tones (p. 63) and the IN USE indicator flashes quickly on the base unit. •Charge the battery fully (p. 12). •You cannot store an item in the directory while the handset is in the talk, speakerphone, intercom or Room Monitor mode, 2-Way Radio mode or in the remote operation mode. •Do not pause for over 60 seconds while storing. •To answer the call, press or . Start again from the beginning after hanging up. •You cannot make a call when the handset is in the remote operation mode. Exit the mode by pressing (OFF) (p. 71). •If the 2-Way Radio mode is on, turn it off (p. 58). Useful Information For assistance, please call: 1-800-211-PANA(7262) 89