Panasonic KX-TG2730S 2.4 Ghz Cordles Phon - Page 91

Answering System Problem Cause & Remedy The Answering System is on, but incoming messages are not recorded. •The recording time is set to "Greeting only". Select "1 minute", "2 minutes" or "3 minutes" (p. 24). •Memory is full. Erase some, or all, of the messages (p. 69). " FULL " is displayed and the ANSWER ON indicator flashes rapidly, and no new messages are recorded. •Memory is full. Erase some, or all, of the messages (p. 69). You cannot access a mailbox from the base unit or the handset. •If more than one other user is using the handsets and base unit, you may not be able to access the mailboxes. Try again later. •If 2 other users are listening to messages in the mailboxes, you cannot access a mailbox. Try again later. •If the Answering System is responding to a call and another user is listening to messages in a mailbox, you cannot access a mailbox. Try again later. •Your handset is too far from the base unit. Walk closer to the base unit. You cannot access a mailbox from a touch tone phone. •Make sure you enter the correct remote code (p. 75). •If "Enter Mailbox password" is heard, Mailbox 2 or 3 has the password. Enter the password (p. 65). •The Answering System may not respond if the tones are too short to activate the unit. Press each button firmly. •The Answering System is off. Turn it on (p. 78). While recording a greeting message, the IN USE indicator flashes quickly on the base unit. •To answer the call, press (DIGITAL!SP-PHONE). Start again from the beginning after hanging up. During playback, incoming call tones are heard. •To answer the call, if you are using the base unit, press (DIGITAL!SP-PHONE). If you are using the handset, press or . For playback, start again from the beginning after hanging up. Useful Information For assistance, please call: 1-800-211-PANA(7262) 91