Panasonic KX-TGA273S C-r H-s For Kxtg2700 - Page 4
LISTENING TO THE RADIO, USING THE SLEEP TIMER, Improving Reception, Preset Tuning, Manual Tuning
UPC - 037988473625
View all Panasonic KX-TGA273S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
2 Listening to the Radio [+, TUNE/CLOCK] [-, TUNE/CLOCK] [SNOOZE/MUTE] 2-C Improving Reception Section 2 For FM For AM [OFF] [AM/FM, RADIO] Memory Buttons ([M1], [M2], [M3], [M4] and [M5]) VOLUME Control VOLUME Loud Extend the cord and place the antenna in a location where reception improves. Reorient the antenna horizontally until reception improves. 2-D Muting the Radio 2-A Manual Tuning Press [SNOOZE/MUTE] while listening to the radio. •" " flashes on the display. •To release the mute, press [SNOOZE/MUTE] again. 1 Press [AM/FM, RADIO] to turn the radio on. 2-E Changing the Tuning Step for FM 2 Press [AM/FM, RADIO] to switch between AM and FM. 3 Tune in to the desired station by pressing [-, TUNE/CLOCK] or [+, TUNE/CLOCK]. • Press and hold [-] or [+] to search faster. You can change the mode for searching for FM stations from 0.2 MHz (factory preset) to 0.1 MHz. •Please note that changing the step will erase all preset FM stations (2-B) and the station you set for the radio alarm (4-A), and change the radio alarm setting to sound with the buzzer. 4 Adjust the volume by using the VOLUME control. To turn the radio off Press [OFF]. 1. Press [AM/FM, RADIO] to turn the radio on. 2. Press [AM/FM, RADIO] to switch to the FM band. 3. Press and hold [AM/FM, RADIO] for about 5 seconds. •The display changes to show the lowest available FM frequency. 2-B Preset Tuning You can assign one FM station and one AM station to each of the 5 memory buttons ([M1], [M2], [M3], [M4] and [M5]) for a total of 10 stations. To preset stations 1 Press [AM/FM, RADIO] to turn the radio on. 2 Press [AM/FM, RADIO] to switch between AM and FM. 3 Tune in to the desired station by pressing [-, TUNE/CLOCK] or [+, TUNE/CLOCK]. • Press and hold [-] or [+] to search faster. 4 Press and hold a memory button ([M1] to [M5]) until the memory number is displayed. • To turn the radio off, press [OFF]. Ex. Memory Number 1 •If you assign another station of the same band to the memory button, the previously assigned station will be erased. •If a power failure occurs, station presets will be retained for about 10 minutes. To listen to preset stations 1 Press [AM/FM, RADIO] to turn the radio on. 2 Press [AM/FM, RADIO] to switch between AM and FM. 3 Press the desired memory button ([M1] to [M5]). • To turn the radio off, press [OFF]. •To change the FM frequency in 0.2 MHz steps again, repeat the procedure above. •If the AM band is selected and you press and hold [AM/FM, RADIO], for about 5 seconds, the band will change to FM and the tuning step for FM will not change. 3 Using the Sleep Timer Section 3 3-A Setting the Sleep Timer The sleep timer turns the radio off after a set time. [SLEEP] While the radio is on, press [SLEEP] repeatedly to select the time (minutes). •Each time you press [SLEEP] the time will change as follows: 30 60 90 120 OFF Ex. Sleep Time: 30 min. •The radio will automatically turn off after the selected sleep time. •You cannot set the sleep timer while an alarm is sounding (4-A, 4-B). To view the time remaining: Press [SLEEP]. To change the setting 1. Press [SLEEP]. (The time remaining is displayed.) 2. Immediately after the time remaining is displayed, press [SLEEP] repeatedly to select the sleep time. For assistance, please call: 1-800-211-PANA(7262)