Panasonic KX-TGA273S C-r H-s For Kxtg2700 - Page 5

4 Using the Alarms Section 4 The charger unit features an alarm clock. You can set the alarm to play the radio or to sound a buzzer at a set time. The radio alarm and the buzzer alarm can be set separately. [BUZZER, ALARM DISPLAY/SET] [RADIO, ALARM DISPLAY/SET] [-, TUNE/CLOCK] [+, TUNE/CLOCK] [SNOOZE/MUTE] [OFF] [AM/FM, RADIO] VOLUME Control Memory Buttons ([M1], [M2], [M3], [M4] and [M5]) 4-A Setting the Radio Alarm 1 Press [AM/FM, RADIO] to turn the radio on. 2 Press [AM/FM, RADIO] to switch between AM and FM. 3 Tune in to the desired station by pressing [-, TUNE/CLOCK] or [+, TUNE/CLOCK]. OR Press the desired memory button ([M1] to [M5]). 4 Adjust the volume by using the VOLUME control. 5 Press and hold [RADIO, ALARM DISPLAY/SET] (the button on the top of the unit) until the time flashes. 6 Set the alarm time by pressing [-, TUNE/CLOCK] or [+, TUNE/CLOCK]. • Pressing and holding [-] or [+] changes the time faster. 7 Press and release [RADIO, ALARM DISPLAY/SET] to save the radio alarm time and the station. • The time stops flashing and returns to the current time. •" " is displayed while the radio alarm is turned on. 8 Press [OFF] to turn the radio off. • The radio will automatically turn on at the set time and will turn off after 1 hour. •You can exit alarm setting mode any time by pressing [OFF]. •The buzzer will sound at the set radio alarm time if you did not turn the radio on in step 1. •To change only the radio alarm time, repeat steps 5 to 7. •If a power failure occurs, the radio alarm time and station preset will be retained for about 10 minutes. To confirm the radio alarm time and station: Press and release [RADIO, ALARM DISPLAY/SET]. •The alarm time and the station will be displayed for about 3 seconds. 4-B Setting the Buzzer Alarm 1 Press and hold [BUZZER, ALARM DISPLAY/SET] (the button on the top of the unit) until the time flashes. 2 Set the alarm time by pressing [-, TUNE/CLOCK] or [+, TUNE/CLOCK]. • Pressing and holding [-] or [+] changes the time faster. 3 Press and release [BUZZER, ALARM DISPLAY/SET] to save the buzzer alarm time. • The time stops flashing and returns to the current time. •" " is displayed while the buzzer alarm is turned on. • The buzzer will start at the set time and will automatically stop after 10 minutes. •You can exit alarm setting mode any time by pressing [OFF]. •If a power failure occurs, the buzzer alarm time will be retained for about 10 minutes. To confirm the buzzer alarm time: Press and release [BUZZER, ALARM DISPLAY/SET]. •The alarm time will be displayed for about 3 seconds. 4-C Stopping the Alarm When the alarm sounds at the set time, " " " and/or " " flashes. [SNOOZE/MUTE] " is displayed and [OFF] [RADIO, ALARM ON/OFF] [BUZZER, ALARM ON/OFF] To stop the alarm temporarily (SNOOZE) Press [SNOOZE/MUTE]. •The alarm will then start again in 6 minutes. You can press [SNOOZE/MUTE] again to stop the alarm. To stop the alarm for the day Press [OFF]. •The setting remains and the alarm will sound daily until you stop the alarm completely. " " and/or " " will remain on the display. To stop the alarm completely 1. While the alarm is sounding or the SNOOZE mode is on, press [OFF], then follow step 2. OR If the alarm is not sounding or the SNOOZE mode is not used, go to step 2. 2. Press [RADIO, ALARM ON/OFF] or [BUZZER, ALARM ON/OFF] to turn the alarm off. •" " or " " disappears from the display. •To turn the alarm on again, press [RADIO, ALARM ON/OFF] or [BUZZER, ALARM ON/OFF]. For assistance, please call: 1-800-211-PANA(7262)