Panasonic KX-TSC14W Multi-line Phn Lowp - Page 42
Incoming Call Tone, INCOMING TONE ?, SAVE AUTO# ?
UPC - 037988472109
View all Panasonic KX-TSC14W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
" Special Features Incoming Call Tone While one line is being used, you may be informed by two tones if another call has arrived on the other line. This incoming call tone can be set/deleted by programming. Your phone comes from the factory set to "2". Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off. 1 Press (FUNCTION/EXIT). 11:50AM11/24 SAVE AUTO# ? 2 Press (_) or (^) repeatedly until "INCOMING TONE ?" is displayed. 11:50AM11/24 INCOMING TONE ? 3 Press (fl) OK/EDIT. ≥The current setting is displayed. ON: The incoming call tone will be heard as long as the other line rings. ≥2: The incoming call tone will only be heard 2 times (factory preset). ≥OFF: The incoming call tone will not be heard. 4 Press (_) or (^) to select the desired setting. 11:50AM11/24 ON 1=SAVE 5 Press (fl) OK/EDIT (SAVE key). ≥A beep sounds. ≥The display will return to step 2. To return to the standby mode, press (FUNCTION/EXIT) or wait for 60 seconds. ≥You can exit the programming mode any time by pressing (FUNCTION/EXIT). ≥If the ringer volume is set to "OFF", the incoming call tone will not be heard even if the incoming call tone is set to "ON" or "2". 42