Panasonic KXTC1852B Digital Spread Spect - Page 15
Selecting the Line Mode
View all Panasonic KXTC1852B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Preparation Selecting the Line Mode If the line is connected to a low voltage system such as a PBX, set to "B". Otherwise the unit may not ring and the Call Waiting Caller ID Feature may not be accessible (p. 44). Your phone comes from the factory set to "A". Make sure the handset is in the standby mode. 1 Press (FUNCTION/EXIT/CH). 1Save directory Voicemail dial 43 1=Yes 2 Press (›) or (‹) repeatedly until the arrow points to "Program". 3 Press FWD/EDIT (fl) (Yes key). Ringer volume 1Program 43 1=Yes 1Save DIRECT# Set flash time 43 1=Yes 4 Press (›) or (‹) repeatedly until the arrow points to "Set line mode". 1Set line mode Set dial mode 43 1=Yes 5 Press FWD/EDIT (fl) (Yes key). Line mode :A 43 1=Save 6 Press (›) or (‹) to select "B" or "A". Press FWD/EDIT (fl) (Save key). ≥A beep sounds. ≥To return to the standby mode, press (FUNCTION/EXIT/CH). Line mode :B ≥You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH). 15