Panasonic KXTC1852B Digital Spread Spect - Page 45
FLASH Button, Selecting the flash time
View all Panasonic KXTC1852B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
FLASH Button Pressing (FLASH/CALL\WAIT) allows you to use special features of your host PBX such as transferring an extension call or accessing special telephone services (optional) such as call waiting. Selecting the flash time The flash time depends on your telephone exchange or host PBX. You can select the following flash times: "700, 600, 400, 300, 250, 110, 100 or 90 ms (milliseconds)". Your phone comes from the factory set to "700 ms". Make sure the handset is in the standby mode. 1 Press (FUNCTION/EXIT/CH). 2 Press (›) or (‹) repeatedly until the arrow points to "Program". 3 Press FWD/EDIT (fl) (Yes key). 4 Press (›) or (‹) repeatedly until the arrow points to "Set flash time". 5 Press FWD/EDIT (fl) (Yes key). 6 Press (›) or (‹) repeatedly until the desired time is displayed. Ringer volume 1Program 43 1=Yes Save DIRECT# 1Set flash time 43 1=Yes Flash time :700ms 43 1=Save 7 Press FWD/EDIT (fl) (Save key). ≥A beep sounds. ≥To return to the standby mode, press (FUNCTION/EXIT/CH). ≥You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH). ≥If you are connected via a PBX, a longer flash time may be necessary to use PBX functions (transferring a call etc.). Consult your PBX supplier for the correct setting. Advanced Operation 45