Panasonic KXTG2357 2.4ghz Cdl Tot 2 H/s - Page 65

Remote Operation from a Touch Tone Phone Direct Remote Operation Once you have entered the remote code, you can also control your unit by direct commands instead of using the voice menu. To end remote operation, hang up at anytime. Direct commands [4] : Plays back new [7] : Records a greeting messages. message. [5] : Plays back all messages. After the long beep, talk for up to 2 minutes. [9] Recording is stopped. [1] : Repeats the current • The greeting is played. message. [*] [4] : Erases the current • If pressed within the first 5 seconds of playback, the previous message message. • A short beep will sound will be played. and the next message will be played. [2] : Skips the current message. [*] [5] : Erases all messages. [9] : Stops the current • A long beep will sound and "No messages" will be operation. heard. • To resume, enter a direct command within 15 seconds, or the voice menu will start (p. 64). [0] : Turns off the Answering System. • The unit hangs up. To turn on the Answering System: Call your unit and wait for 15 rings. • The unit will answer and the greeting will be played. • The Answering System will be turned on. Hang up or enter the remote code for other options. • When turning on the Answering System using a rotary or pulse service telephone, you cannot enter the remote code for other options. Skipping the greeting After calling your unit, press [*] during the greeting. • The unit skips the rest of the greeting and you can start recording your message after the long beep. Answering System For assistance, please call: 1-800-211-PANA(7262) 65