Panasonic KXTGP550 Administration Guide - Page 116

Busy Tone, 7.4.3, Ringing Tone

Page 116 highlights

3.7.4 Tone Settings Value Range Default Value Configuration File Reference 0-5000 (0: Infinite time) Note • The unit will play the tone for the duration of the first value, stop it for the duration of the second value, play it for the duration of the third value, and then stop it for the duration of the last value. The whole sequence will then repeat. For example, if the value for this setting is "100,100,0,0", the unit will play the tone for 100 ms, stop it for 100 ms, and then play it continuously. 0,0,0,0 (The unit plays the dial tone continuously.) DIAL_TONE_TIMING (Page 165) 3.7.4.2 Busy Tone Tone Frequencies Description Value Range Default Value Configuration File Reference Specifies the dual-tone frequencies, in hertz, of busy tones using 2 whole numbers separated by a comma. 0, 200-1000 (0: No tone) 480,620 BUSY_TONE_FRQ (Page 165) Tone Timings Description Value Range Default Value Configuration File Reference Specifies the pattern, in milliseconds, of busy tones using 4 whole numbers (on 1, off 1, on 2, off 2) separated by commas. 0-5000 (0: Infinite time) 500,500,500,500 BUSY_TONE_TIMING (Page 165) 3.7.4.3 Ringing Tone Tone Frequencies Description Value Range Default Value Configuration File Reference Specifies the dual-tone frequencies, in hertz, of ringback tones using 2 whole numbers separated by a comma. 0, 200-1000 (0: No tone) 440,480 RINGING_TONE_FRQ (Page 166) 116 Administrator Guide Document Version 2010-08

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256

Value Range
0–5000 (0: Infinite time)
Note
The unit will play the tone for the duration of the first value, stop
it for the duration of the second value, play it for the duration of
the third value, and then stop it for the duration of the last value.
The whole sequence will then repeat. For example, if the value
for this setting is "100,100,0,0", the unit will play the tone for 100
ms, stop it for 100 ms, and then play it continuously.
Default Value
0,0,0,0 (The unit plays the dial tone continuously.)
Configuration File Reference
DIAL_TONE_TIMING (Page 165)
3.7.4.2
Busy Tone
Tone Frequencies
Description
Specifies the dual-tone frequencies, in hertz, of busy tones using 2
whole numbers separated by a comma.
Value Range
0, 200–1000 (0: No tone)
Default Value
480,620
Configuration File Reference
BUSY_TONE_FRQ (Page 165)
Tone Timings
Description
Specifies the pattern, in milliseconds, of busy tones using 4 whole
numbers (on 1, off 1, on 2, off 2) separated by commas.
Value Range
0–5000 (0: Infinite time)
Default Value
500,500,500,500
Configuration File Reference
BUSY_TONE_TIMING (Page 165)
3.7.4.3
Ringing Tone
Tone Frequencies
Description
Specifies the dual-tone frequencies, in hertz, of ringback tones using 2
whole numbers separated by a comma.
Value Range
0, 200–1000 (0: No tone)
Default Value
440,480
Configuration File Reference
RINGING_TONE_FRQ (Page 166)
116
Administrator Guide
Document Version
2010-08
3.7.4 Tone Settings