Panasonic KXTGP550 Administration Guide - Page 216
Firmware Server Setup, Firmware Update Settings
View all Panasonic KXTGP550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
6.2 Firmware Update Settings 6.1 Firmware Server Setup No special server is necessary for the firmware update. You can use an HTTP, HTTPS, FTP, or TFTP server as the firmware server by simply setting its URL. 6.2 Firmware Update Settings Firmware updates are provided by the manufacturer when necessary. The firmware update will be executed by setting the corresponding parameters using configuration file programming (® see 4.3.4 Firmware Update Settings) or Web user interface programming (® see 3.8.1 Firmware Maintenance). The following shows the parameters and the setting procedures: Firmware Update Enable/Disable • In a configuration file, add the line, FIRM_UPGRADE_ENABLE="Y". • In the Web user interface, click the [Maintenance] tab, click [Firmware Maintenance], and then select [Yes] for [Enable Firmware Update]. Firmware Version Number for Europe Model • In a configuration file, specify the new version number of the Europe model in "FIRM_VER_EUDECT". Firmware Version Number for North America Model • In a configuration file, specify the new version number of the North America model in "FIRM_VER_USDECT". Automatic Update • In a configuration file, add the line, FIRM_UPGRADE_AUTO="Y". • In the Web user interface, click the [Maintenance] tab, click [Firmware Maintenance], and then select [Automatic] for [Update Type]. Firmware Server URL • In a configuration file, specify the URL in "FIRM_FILE_PATH". • In the Web user interface, click the [Maintenance] tab, click [Firmware Maintenance], and then enter the URL in [Firmware File URL]. Configuration Parameter Example By setting the parameters as shown in the following example, the unit will automatically download the firmware file from the specified URL, "http://firm.example.com/firm/EUDECT01.05.fw", and perform the update operation if the currently used firmware version is older than 01.05. Example FIRM_UPGRADE_ENABLE="Y" FIRM_VER_EUDECT="01.05" # FIRM_VER_USDECT # not needed for EU-DECT phone FIRM_UPGRADE_AUTO="Y" FIRM_FILE_PATH="http://firm.example.com/firm/EUDECT01.05.fw" 216 Administrator Guide Document Version 2010-08