Panasonic KXTGP550 Administration Guide - Page 36
Phone User Interface Programming - kx tgp550 reset
View all Panasonic KXTGP550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
2.1.2 Speed/Duplex Settings 2.1 Phone User Interface Programming This section provides information about the features that can be configured directly from the base unit or handsets, but that are not mentioned in the User Guide. To enter direct commands, use the keys and soft keys on the base unit (KX-TGP550 only) or handset. For details about the other available features, settings and key operations on the phone user interface, refer to the User Guide on the Panasonic Web site (® see Introduction). 2.1.1 Phone User Interface Feature List and Direct Commands The following table shows additional features programmable with direct commands. These commands are hidden from end users. Direct Command Feature Ref. [#][5][3][0] Speed/Duplex LAN port Page 36 VLAN setting*1*2 PC port*1 Enable VLAN IP Phone VLAN ID Page 37 Priority PC VLAN ID Priority [#][7][3][0] IP Reset*3 Page 38 [#][7][3][1] Terminal No. Page 39 [#][7][3][9] Reset Web ID/Password*3 Page 40 *1 Available for KX-TGP550 only. *2 If your phone system dealer does not allow you these settings, you cannot change them even though the unit shows the setting menu. Contact your phone system dealer for further information. *3 Not displayed on the LCD of the unit. 2.1.2 Speed/Duplex Settings You can select the connection mode (combination of link speed and duplex mode) of the LAN port and PC port (KX-TGP550 only). You can select from the following values: • Auto (default) • 10M/Full • 10M/Half • 100M/Full • 100M/Half For details about configuring the speed/duplex setting from the Web user interface, see 3.4.2.1 Link Speed/ Duplex Mode. 36 Administrator Guide Document Version 2010-08