Panasonic KXTGP550 Administration Guide - Page 226
Checking the Status of the Unit
View all Panasonic KXTGP550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
7.1 Troubleshooting Time Problem The time is not correct. Cause/Solution • Adjust the date and time of the unit. For details about the operations, refer to the User Guide on the Panasonic Web site (® see Introduction). • In the Web user interface, you can set NTP synchronization and DST (Summer Time) control to adjust the time automatically (® see 3.5.5 Time Adjust Settings). • If the time is still incorrect even after setting NTP synchronization, check the firewall and port forwarding settings on the router (® see 1.1.10 Other Network Settings). Checking the Status of the Unit You can check the status of the unit by using Web user interface programming (® see 3.3.2 Network Status and 3.3.3 VoIP Status) or by looking at system logs (® see 4.3.3 Syslog Settings) sent from the unit. To check the setting status in the Web user interface 1. Click the [Status] tab, and then click [Network Status] to check the network settings. 2. Check the status displayed. 3. Click [VoIP Status] to check the VoIP settings. 4. Check the status displayed. To send the system logs of specified events to the syslog server 1. Set the following parameters to specify your PC (Windows, Linux® operating system, etc.) as the syslog server: - SYSLOG_ADDR: Specifies the IP address or FQDN of the syslog server. - SYSLOG_PORT: Specifies the port number of the syslog server. 2. Set the following parameters to log specific events: - SYSLOG_EVENT_SIP*1: Logs SIP-related syslog events. - SYSLOG_EVENT_CFG*1: Logs syslog events regarding configuration. - SYSLOG_EVENT_VOIP*1: Logs syslog events regarding VoIP operation. - SYSLOG_EVENT_TEL*1: Logs syslog events regarding telephone functions. *1 In this version of the unit, this system log will not be sent. 226 Administrator Guide Document Version 2010-08