Panasonic MCUL671 MCUL671 User Guide - Page 48

Secondary Filter Screen Tamis filtrant Filtro secundario Suction Inlet Entrée d'aspiration Entrada de aspiración Hose Inlet Entrée du tuyau Entrada de manguera Removing Clogs If the vacuum cleaner does not seem to have adequate suction, first check if the dust bin is full or if a filter is clogged. ➢ Check the hose area. ➢ Remove extension hose by grasping the hose collar, twisting, and pulling straight off. Connector Pipe Tube connecteur Tubo conector ➢ Visually inspect the hose and the base area into which the hose is connected. ➢ Remove any visible clog. Short Hose Tuyau court Manguera corta ➢ Re-connect the extension hose to the connector pipe. AB ➢ Plug in the vacuum cleaner and turn it on. ➢ Stretch the hose to maximum length and then allow the hose to return to its storage length. ➢ Turn off and unplug the vacuum cleaner. ➢ Remove dust bin and check secondary filter screen for clogs. B A Hose Coupling Accouplement de tuyau Acoplamiento de manguera ➢ If the dust bin, filter areas and the hose areas are free of clogs, check the nozzle area. ➢ Return the vacuum cleaner to the upright position before plugging into an electrical outlet. - 48 -