Panasonic MK-G20NR-W Operating Instructions - Page 7
Clean
View all Panasonic MK-G20NR-W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Caution Unplug when acsrambling or di.ascrimblirig the unit Close supervision is necessary when any appliance is used near children. When carrying the unit, be sure to hold the motor housing with both hands, not to hold only the hopper plate. Do not fix the cutting blade and the cutting plate when using the kubbe attachments. Never place finger into the feeding tube. Never place fork, knife or other utensils into the feeoing tube. Never feed food with hand.Use the food pusher. Do not grind meat bones and othe hard materials. (It may cause jamming) Do not grind ginger and other materials with hard fiber. (It will not grind) To avoid jamming, do not force to operate the unit with excessive pressure. If the unit jams due to hard materials lodged on to the feed screw or the cutting blade, switch off immediately and clean the unit. (See "Caution onJamming`below.) When the circuit breaker activates, do not switch on. Never try to undo the parts or to repair the unit by yourself. Note: The grinder head may move slightly up and down during use. This is normal. How to Clean (Disassembling) Make sure that the motor has stopped completely. Disconnect the plug from the power outlet. Disassemble by reversing the steps from l] -lif (See Pa) ItiI Cap has pins for easy unscrewing. n To remove the cutting plate easily, place a screwdriver between the cutting plate and the head as illustrated and lift up. (Cleaning) Remove meat, etc. Wash each part in warm soapy water. - A bleaching solution containing chlorine will discolor aluminum surfaces. -Do not immerse the motor housing in water, but only wipe it with a damp cloth. • Thinners and benzines will crack or change the color of the unit -Donot wash washable parts in a dishwasher. A little salad of on @ -(Dafter washingand drying will keep them lubricated. Caution on jamming When the circuit breaker automatically stops the motor, or when the motor continues to function but no meat comes out of the culling plate, due to jamming of small bones or other materials, switch off. Do not switch on again until all the jammed materials are removed. Clean the unit (See " How to clean ".) - 5 -