Panasonic PT52LCX16 PT52LCX16 User Guide - Page 58
Operating Peripheral Equipment
View all Panasonic PT52LCX16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Operating Peripheral Equipment 4 Input the equipment's 4-digit Remote Control code. (p. 60-62) 5 Confirm the equipment with the Remote Control. • The external equipment turns On. If the equipment does not operate with Remote Control • When your equipment has a single code → Input the remote control code again • When your equipment has multiple codes → Change the code with step 4 above and test again (p. 60-62) Caution: • Registration will fail if the wrong code is input or it takes more than 30 seconds to register. You can operate other manufacturers' components using this unit's Remote Control. 1 Connect the external devices to the Projection Display and turn Off the external devices. 2 + Press both buttons simultaneously for more than 3 seconds. • Release the buttons when the equipment selection buttons start flashing. To find a code not listed in the code list This procedure searches all codes and is called the "sequence method." 1 + After step 3 above, change the code and test store. • Operate the equipment with the Remote Control. (p. 59) • Repeat until the code is found. • It may take many attempts before the correct code is found. 2 When the correct code is found. 3 Select the equipment with the equipment selection button. • The selected button remains lit (other buttons are not lit). 58 For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo