Panasonic PV GS31 Digital Video Camera - Page 59

Others CHECK REC TAB: You are attempting to record pictures on a tape with the accidental erasure prevention slider placed in the [SAVE] position. You are attempting Audio Dubbing or Digital Dubbing on a tape with the accidental erasure prevention slider placed in the [SAVE] position. WRONG TAPE FORMAT: You are attempting to play back a tape section that has been recorded with a different TV system. This cassette is incompatible. UNABLE TO A.DUB (LP RECORDED): Because the original recording was in LP Mode, audio dubbing cannot be performed. UNABLE TO A.DUB: You are attempting to perform audio dubbing on a non-recorded tape. COPY PROTECTED: Images cannot be recorded correctly because the medium is protected by a copy guard. CARD ERROR: The Card is not compatible with this Camcorder. You are attempting to format a failed card. It displays, when you attempt to insert the incompatible card to Card Slot. NO CARD: No card is inserted. CARD FULL: Card does not have sufficient memory remaining. Select Picture Playback Mode and delete unnecessary files. NO DATA: There are no recorded files on the card. UNPLAYABLE CARD: You are attempting to play back data not compatible with this Camcorder. FILE LOCKED: You are attempting to erase protected files. CARD LOCKED: The write protection switch on the SD Memory Card is set to [LOCK]. CHANGE MODE TO USE USB: The USB Cable is connected to the Camcorder in Card Recording Mode. CANCEL NIGHT VIEW MODE: You are attempting to select an item other than [OFF] in [ SCENE MODE] during MagicPix Mode. DISCONNECT USB CABLE: You are attempting to turn the Mode Dial in PC Mode with the USB Cable connected to the Camcorder. You are attempting to record pictures on a Tape/Card with the USB Cable connected to the Camcorder. PC DOES NOT SUPPORT USB2.0: The Camcorder is connected to a personal computer that does not support USB2.0. CAN NOT USE USB: You are connecting the USB Cable with the DV Cable connected in MotionDV Mode. CHANGE TO MANUAL MODE: You are attempting to select an item other than [OFF] in [ SCENE MODE] when the [AUTO/ MANUAL/FOCUS] Switch is set to [AUTO]. CAN NOT OPERATE (MOTION DV MODE) (PV-GS35 Only): You are attempting to change [ setting during MotionDV Mode. TURN OFF THE VIDEO LIGHT: D.ZOOM] You are attempting to select an item in [ SCENE MODE] when Light is on. Notes and Hints „ Concerning the Power Supply • When the Camcorder has been used for a long time, the Camera body becomes warm, but this is not a malfunction. • If the [CHARGE] Lamp does not light up although the Battery is attached to the AC Adaptor, detach the Battery and reattach it. „ Inserting/Removing the Cassette • When inserting a previously recorded Cassette, use the Blank Search Function (p. 26) to find the position where you want to continue recording. If you overwrite-record on a previously recorded cassette, be sure to find the position where you want to continue recording. • If a new Cassette is inserted, rewind to the beginning of the tape before starting recording. • When inserting the cassette, make sure it faces in the right direction and then push it in until it stops. • When the Cassette Holder is in action, do not touch anything except the [PUSH] mark. • Close the Cassette Compartment Cover tightly. • When closing the Cassette Compartment Cover, do not get anything, such as a cable, caught in the cover. „ Alarm Sounds • Set to Tape/Card Recording Mode. When [ BEEP SOUND] on the [ SETUP] is set to [ON], confirmation/alarm beeps are issued as follows. 1 Beep • When you start recording • When you turn on the power 2 Beeps • When you pause recording 2 Beeps 4 times • When a cassette with its erasure prevention tab set to [SAVE] is inserted, condensation occurs, and at other times. Check the sentence displayed on the screen. 59